|Main Power:||30 Kw||Suitable Material:||Galvanized Steel, Cold-rolled Strip|
|Thickness:||1.5~2.5mm||Roller:||GCr15 Bearing Steel|
|Roller Station:||18 Stations||Shaft:||No. 45 Steel, Quenched|
Cr12 channel rolling machine,
0.8mm channel rolling machine,
Cr12 channel making machine
Cr12 Heat Treatment Automatic Strut Channel Roll Forming For 0.3 - 0.8 Mm
Strut Channel System Advantages:
♥ High strength to ocst ratio
♥ Completely adjustable
♥ No welding or drilling required
♥ Strut is re-usable
♥ One-inventory adaptable to many jobs
♥ Saw and wrench are the only tools needed
1. Description of Strut Channel Roll Forming Machine
Briefly, a strut channel roll forming machine is also called Uni strut channel roll forming machine, it is used for produce the steel channels (such as supports wiring, plumbing, or mechanical components) which are usually used in air-conditioning and ventilation systems.
Actually, there are standard dimensions for common Uni struct channels, i.e. 21*41, 41*41, and 41*61, etc. Besides, there are continuous punching holes on the bottom of the channels for joints.
A roll forming equipment that manufactures strut channels is strut channel roll forming machine
2. Major Technical Parameters
|Material||Colored steel sheet, galvanized steel sheet, aluminum sheet|
|Thickness of coil sheet||0.3-0.8 mm|
|Roller material||High grade 45# forged steel, surface hard chromium plating|
|Shaft material||High grade 45# forged steel|
|Cutting blade||Cr12 mould steel with quenched treatment|
|Diameter of shaft||50mm or as your requirement|
|Main frame||300 H steel|
|Forming steps||14 stations|
|Hydraulic station power||5.5 KW|
|Appearance size||6.5*1.5*1.5 m|
|Hydraulic oil||40# hydraulic oil|
|Electric tension||380V 50 Hz 3 Phase or as your requirement|
|Cut Mode||Hydraulic forming after cutting off|
|Cutter materia||Cr12 Heat Treatment|
|Electronic control system||PLC, Touch Screen, Encoding counter|
|Color||Blue, green or yellow or as your requirement|
|Rolling material||45# steel,roller surfaces polishing, hard plating|
1.This roll forming machine can rollform metal roofing sheet. After roll formed by this roll forming machine, the surface will be very smooth and beautiful without any scratch on surface.
2.Rollforming process:uncoiler, rollforming, forming step effect, cut to length.
3.Fully Automatic Control System with PLC.
4.Easy operation: Key in the length and quantity on the control panel.
5.two years warranty for free, and beyond two years if any part broken, tell us and pay us we delievery any part u need. And support technical skills for machine for whole life.
Install and Training:
If buyers come to our factory to inspect, the training to install and operate is provided face to face.
If not, manual and video are provided to show how to install and operate.
a.The seller will debug the machines freely in China, and the traffic expense in China of the technique people will be paid by the seller.
When the technique men go to the buyer's place to debug the machines, the buyer should pay the
expense of accommodation, and round-trip tickets for the seller’s men. and pay the technician USD80 per day.
b. If the buyer sends people to receive the training of the operation given by the seller, during the training period, the seller should pay the expense of accommodation, and traffic for the buyer's men.
1. Q: Are you a manufacturer, trading company?
A: We are a manufacturer, and we have built up our company since 2007.
2. Q: Where is your factory located?
A: Our factory address is: No. 551, the Zhenze West Road, Huazhuang Street, Binhu District, Wuxi City, Jiangsu, China
3. Q: How can I get to your factory?
A: Our factory is near Shanghai Airport, we can pick you up at the airport. Or you can by plane direct to Wuxi airport. We can pick you up.
4. Q: If I will need to stay in your place for a few days, is that possible to book the hotel for me?
A: It’s always my pleasure, hotel booking service is available.
Contact Person: Alfred