First step:
Designing. After order confirmation, we start to design the machine, such as the basement, structure, rollers, shafts, power, cutting device, programs and so on.
Second step:
The main parts, like rollers and shafts, are produced by ourselves. We have several high-precision CNC lathes and other kinds of new machine tools so that the quality and precision can be controlled.
Third step:
Assembling. The machines are assembled by technicians with years of experience, which can help workers improve the production efficiency and machine’s quality.
Fourth step:
Test. The raw material of different specifications is prepared for testing. And during the test, long enough material is used. Because if the material is not long enough, some defects cannot be exposed.
Fifth step:
Delivery. Because of the weight of machine itself, the packing is usually bare packing. Machine will be fixed inside container by steel wire, in order to make sure it won’t move during transportation and avoid any kinds of damage of machine and container.
Test Center
Test the size, roundness, strength and wear resistance ability of the rollers and steel parts.
3811A Portable Hardness Tester
Impact Direction: Vertical & Horizontal
Measuring Accuracy: +/- 0.5% (referred to L=800)
Minimum Thickness of Sample: 1"
Operating Temperature: 5-104 F
Dimensions: 5.96 x 2.938 x 1.270" (150 x 74 x 32mm)
Weight: 8.6 oz (245 grams)
TUD Ultrasonic Flaw Detector
Scanning Range: 2.5mm~9999mm
Frequency: 0.1MHz~25MHz
Gain Range: 0dB~110dB
Vertical linearity error≤3%
Horizontal linearity error≤0.2%
Dynamic Range≥34dB
Rectification: Positive half wave, negative wave, full wave, and RF
Sensitivity leavings≥60dB
D-Delay: -20μs ~3400μs
Delay: -20μs ~3400μs
Scanning Resolution: 0.1mm(2.5mm~99.99mm):1mm(100mm~9999mm)
Sound Velocity: 1000m/s~9999m/s
Overall dimension: 243mm×173 mm×85mm
Weight: 1500g
Test mode: Pulse-echo, dual and through transmission
Damping: 50ohms,100 ohms ,150 ohms
Unit: mm/inch
Interface: RS232/USB
Printer: EPSON ink-jet printer
Temperature: -10~40℃
Power supply: Li battery 4×3.6V
Humidity: 20%~90%RH
Contact Person: Mr. Alfred
Tel: 0086 18121549786
Fax: 86-510-82620085