|
Product Details:
|
| Material: | G300-G550 Zinc Plated Coil | Thickness: | 0.7-1.2mm |
|---|---|---|---|
| Product Capacity: | 300-700m/h | Main Unit Power: | 7.5Kw |
| Voltage: | 380V/50Hz/3phase | Total Power: | 14.5Kw |
| High Light: | metal framing machine,light steel frame machine |
||
Blue color 4900 meter light gauge steel framing machines for lgs structure houses
1. Brief Description of the Light Gauge Steel Framing Machine
Light Gauge Steel Framing Machine (also named LGS Framing Machine) is for LGS structure houses. The Light Gauge Steel Structure is based on factory made galvanized light gauge steel components produced by the cold forming method assembled as panels at site forming structural steel framework of a building and varying wall and floor construction.
The panels are assembled on site with screws and bolts to form the internal and separating walls and inner leaf of the external walls of a building and floors & ceiling. The building is completed by the installation of an external layer of insulation material and outer leaf of CP Board or dry mix shotcrete. The system can incorporate all types of architectural features like covering, boxes, cantilevers, projections, infill walls, mezzanine floors etc.
Light gauge steel can replace lumber in residential and light commercial structures. It serves perfectly for load-bearing walls and interior rooms. However, due to its strength, studs can be 24 inches on center rather than the customary 18 or 20 inches, reducing the number of studs necessary to frame a wall. Framing is quite similar to wood, but very little cutting and sizing need occur at the job site as the studs are manufactured to precise lengths.
Most experienced light gauge framers fasten the parts with self-tapping screws. Because of its light weight, each piece can be carried by hand. The longer spans means less fastening and faster construction. As a metal, light gauge steel won’t rot, split, warp, shrink twist, burn or become termite food.
Steel framing produces far less on-site waste than wood framing, making debris removal less costly. Also, since it goes to recycling facilities, the waste can even produce some income to offset project costs.
2. Major Technical Parameters of F1-C89 LGS Framing Machine
| Major Technical Parameters of F1-C89 LGS Framing Machine | |
| Suitable Material | G300-G550 zinc plated, aluminum-zinc plated coil |
| Thickness of Suitable Material | 0.7-1.2mm |
| The maximum product capacity | 2800m/h |
| Normal production capacity | 300-700m/h |
| Main unit power | 7.5Kw |
| Voltage | 380V/50Hz/3phase |
| Hydraulic power | 5.5Kw |
| Total power | 14.5Kw |
| Punching dies |
Dimple hole, chamfer cut, web notch, lip cut, Service hole, swage, shear, bolt hole |
| Dimple accuracy | +/-0.5mm |
| Ink jet printer | Standard (custom according to buyer’s requirement) |
| Size | Approx 4900mm*1000mm*1500mm |
| Weight | About 4.5 Ton |
| Main Color | Orange, Green, Black, Blue (can be custom) |
| Decoiler | Power: 1.5kw, loading Weight:2 Tons, Automatic |
3. Major Components of LGS Framing Roll Forming Machine
| No. | Description |
| 1 | Main Forming Machine |
| 2 | 1.5T Hydraulic Strip Uncoiler |
| 3 | Automatic Punching Device |
| 4 | Hydraulic Motor System |
| 5 | IPC Computer Controlling System with Product Software |
| 6 | Hydraulic Post-cutter |
| 7 | Automatic Printing Device |
| 8 | Vertex BD Design Software |
| 9 | Run Out Table |
| 10 | Tools |
| 11 | Operation Manual |
4. FAQ
1). Q: Are you a manufacturer or trading company?
A: We are the manufacturer with over 11 years’ production experience.
2). Q: I am new in this field. How could I understand the machine well?
A: I have been on this filed since 2011. You can add my Whatsapp/Skype +86-15821208506. I am always waiting for service for you.
3). Q: I have no Whatsapp and Skype, how could I contact you
A: You can send email to me (alfred@lebron-machinery.com). I will reply you in the shortest time
4). Q: How should I do if I want to get the price of the machine?
A: Send me your design drawing if you have. Or tell me your design idea. I will ask my engineer to design it for your confirmation.
Contact Person: Alfred
Tel: +8618115330187
