Product Details:
|
Total Power: | 39.7 Kw | Forming Stations: | 31 Stations |
---|---|---|---|
Feeding Width: | 300mm Max | Thickness: | 2.0~3.0mm |
Roller Shaft: | 75mm | Roller Material: | GCr15 |
High Light: | automatic roll forming machine,steel roll forming machine |
Post Punch and Track Cutting Solar Strut Channel Roll Forming Machine Siemens PLC Control
1. Workflow:
De-coiler→Leveling→ Roll Forming→Punch & Cutting system→Ran-out table
2. Main Technical Parameters of Production Line:
1). Production Line Total Power: 39.7 Kw.
2). Occupy Area of production line: length 35m*width 3.5m*height 2.0m
3). Feeding direction: from the left side to right side
4). Voltage: 380V, 50Hz, 3 phase (or custom according to buyer’s requirement)
5). Pneumatic station: pressure 0-0.6MPa.,0.5m3/min
6). Hydraulic oil: 46# Hydraulic oil
7). Gear oil: 18# gear oil
3. Main Technical Parameters of Machine
1). Suitable Width of Raw material:≤300 mm
2). Suitable Thickness of Raw Material: 2.0~3.0mm
3). Suitable Raw Material: Galvanized Steel, Low Carbon Steel
4). Roll Forming Speed: 15~30m/min
5). Production Speed with Punch hole: 9~15m/min
6). Length of the workpiece: 500mm to 4000 mm
3. Production Line Components List
No. | Name | Type | Qty. (Set) | Motor Power (KW) |
1 | Decoiler | MT-300 | 1 | 2.2 |
6 | Roll Forming System | Gantry gearbox | 1 | 30 |
7 | Hydraulic Punch & Cutting | 1 | 7.5 | |
8 | Run-out Table | SL-300X4000 | 1 | |
9 | Electric Control Cabinet | 1 |
Contact Person: Alfred
Tel: +8618115330187