|Main Power:||30 Kw||Suitable Material:||Galvanized Steel, Cold-rolled Strip|
|Thickness:||1.5~2.5mm||Roller:||GCr15 Bearing Steel|
|Roller Station:||18 Stations||Shaft:||No. 45 Steel, Quenched|
automatic roll forming machine,
steel roll forming machine
30KW full automatic strut channel roll forming machine equipped automatic puncher
1. Description of Strut Channel Roll Forming Machine
Briefly, a strut channel roll forming machine is also called Uni strut channel roll forming machine, it is used for produce the steel channels (such as supports wiring, plumbing, or mechanical components) which are usually used in air-conditioning and ventilation systems.
Actually, there are standard dimensions for common Uni struct channels, i.e. 21*41, 41*41, and 41*61, etc. Besides, there are continuous punching holes on the bottom of the channels for joints.
A roll forming equipment that manufactures strut channels is strut channel roll forming machine
2. Major Technical Parameters
|1||Dimension||30m x 3m x 2.5m (L*W*H)|
|2||Raw material||Mild steel, Galvanized steel coil or strip|
|3||Coil Width||300 mm max|
|5||Forming stations||18 stations, gearbox transmission|
|6||Total power||45KW AC motor|
|7||Track cutting motor||Track cutting motor|
|8||Forming speed||20m/min max|
|9||Roller||GCr12MoV Steel, quenched, coated with hard chrome|
|10||Shaft||45# steel with tempering heat-treatment|
|11||Shaft diameter||Dia 80mm|
|12||Roller station||18 stations|
|14||Hydraulic power||5.5 KW|
|16||Control system||PLC control system|
3. Main Components of Strut Channel Roll Forming Machine
|2||Servo Feeder||1 Set|
|3||Hydraulic Punching Device||1 Set|
|4||Strut Channel Roll Former||1 Set|
|5||Hydraulic Cutting||1 Set|
|6||Hydraulic Station||1 Set|
|7||Ran-out Table||1 Set|
|8||PLC Control System Cabinet||1 Set|
Install and Training:
If buyers come to our factory to inspect, the training to install and operate is provided face to face.
If not, manual and video are provided to show how to install and operate.
We provide 12-hour online service for our customers. Phone: +86 15221061606
a.The seller will debug the machines freely in China, and the traffic expense in China of the technique people will be paid by the seller.
When technique men go to the buyer's place to debug the machines, the buyer should pay the
expense of accommodation, and round-trip tickets for the seller’s men. and pay the technician USD80 per day.
b. If the buyer sends people to receive the training of the operation given by the seller, during the training period, the seller should pay the expense of accommodation, and traffic for the buyer's men.
1. Q: Are you a manufacturer, trading company?
A: We are a manufacturer, and we have built up our company since 2007.
2. Q: Where is your factory located?
A: Our factory address is: No. 551, the Zhenze West Road, Huazhuang Street, Binhu District, Wuxi City, Jiangsu, China
3. Q: How can I get to your factory?
A: Our factory is near Shanghai Airport, we can pick you up at the airport. Or you can by plane direct to Wuxi airport. We can pick you up.
4. Q: If I will need to stay in your place for a few days, is that possible to book the hotel for me?
A: It’s always my pleasure, hotel booking service is available.
Contact Person: Alfred