|Main Power:||3 Kw||Suitable Material:||Galvanized Steel, Cold-rolled Strip|
|Thickness:||1.5~2.5mm||Roller:||GCr15 Bearing Steel|
|Roller Station:||18 Stations||Shaft:||No. 45 Steel, Quenched|
1.5mm Strut Channel Roll Forming Machine,
CE Strut Channel Roll Forming Machine,
1.5mm roll forming equipment
3KW Full Automatic Strut Channel Roll Forming Machine Equipped
1.This roll forming machine can rollform metal roofing sheet. After roll formed by this roll forming machine, the surface will be very smooth and beautiful without any scratch on surface.
2. Rollforming process:uncoiler, rollforming, forming step effect, cut to length.
3. Fully Automatic Control System with PLC.
4. Easy operation: Key in the length and quantity on the control panel.
5. Two years warranty for free, and beyond two years if any part broken, tell us and pay us we delievery any part u need. And support technical skills for machine for whole life.
6. We also can do a custom roll forming machine, We can design the machine according to your specification and profile drawing.
7. One roll forming machine only can produce one profile. and we also can produce double or three layer roll forming machine.
1. Description of Strut Channel Roll Forming Machine
Briefly, a strut channel roll forming machine is also called Uni strut channel roll forming machine, it is used for produce the steel channels (such as supports wiring, plumbing, or mechanical components) which are usually used in air-conditioning and ventilation systems.
Actually, there are standard dimensions for common Uni strut channels, i.e. 21*41, 41*41, and 41*61, etc. Besides, there are continuous punching holes on the bottom of the channels for joints.
A roll forming equipment that manufactures strut channels is strut channel roll forming machine
2. Major Technical Parameters
|Main Motor Power||3kw|
|Hydraulic Station Power||3kw|
|Hydraulic Oil Pump||CB-E310|
|The diameter of the Principal Axis||70MM|
|Material of Roller||45#steel hard chrome plating|
|Installation Dimension (L*W*H)||6.5m*1.5m*0.8m|
|Equipment Parts||roll forming system, hydraulic system, PLC frequency conversion control system, counter, and cutting system.|
|Production||according to customers' demand|
Install and Training:
If buyers come to our factory to inspect, the training to install and operate is provided face to face.
If not, manual and video are provided to show how to install and operate.
a.The seller will debug the machines freely in China, and the traffic expense in China of the technique people will be paid by the seller.
When technique men go to the buyer's place to debug the machines, the buyer should pay the
expense of accommodation, and round-trip tickets for the seller’s men. and pay the technician USD80 per day.
b. If the buyer sends people to receive the training of the operation given by the seller, during the training period, the seller should pay the expense of accommodation, and traffic for the buyer's men.
Q: Can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us
Q: How can we be assured that you will deliver us quality machine with spare parts?
A:1. Customers send the technical people to our factory for checking the quality.
2.We can send the technicians to the buyer`s factory for the installation of the machine.
3. Good aftersales-service, it's free of charge during the warranty period.
Contact Person: Alfred