|
Product Details:
|
| Shaft Material: | No.45 Steel. Chromed, Quenching | Roller Station: | 18 Stations |
|---|---|---|---|
| Main Power: | 30 Kw | Controller: | PLC System |
| Color: | Orange | Weight: | About 8000 Kgs |
| Highlight: | automatic roll forming machine,steel roll forming machine |
||
2018 New Type Siemens PLC Control Strut Channel Roll Forming Machine Full Automatic
1. The equipment technical requirements:
equipment area: 45 * 3.0 * 5 meters (length x width x height). (according to finally provide foundation drawing shall prevail)
device feed direction: left feed.
voltage parameters for 380, 50 Hz, 3 phase.
gas source: the flow of 0.5 m3 / min; Pressure is 0.6 MPa.
hydraulic oil: 46 # hydraulic oil.
gear oil: 18 # hyperbolic gear oil.
2. Rolling product range
the stamping/molding unit can pedal profile rolling thickness of 2 mm.
size rolled products: according to customer’s drawing
3. Major Technical Proposal
| Item | Specification | Description |
| 1 | Main Motor | 18.5*2 KW |
| 2 | Roller | GCr15 |
| 3 | Cutter | Cr12 |
| 4 | Roller Station | 20 stations |
| 5 | Roll Forming Speed | 10~12m/min |
| 6 | Suitable Material | Galvanized Steel Strip, Coll-rolled strip |
| 7 | Thickness | 1.5~2.5mm |
4. Main components
| No. | Name | Qty. (Set) | Remark |
| 1 | 5 Ton Manual De-coiler | 1 | |
| 2 | Leveler | 1 | |
| 3 | Servo Feeder | 1 | |
| 4 | Punching Press JH21-80 | 1 | YANGLI GROUP |
| 5 | Punching Die | 4 | |
| 6 | Roll forming machine | 1 | |
| 7 | Hydraulic Start-stop Cutting device | 1 | |
| 8 | Cutting blade | 3 | |
| 9 | Collection Table | 1 | |
| 10 | Electric control system | 1 |
Contact Person: Mr. Alfred
Tel: 0086 18121549786
Fax: 86-510-82620085
