Payment & Shipping Terms:
|Main Power:||5.5KW||Hydraulic Power:||4.0KW|
|Suitable Material:||Galvanized Steel, Cold-rolled Steel Strip||Width:||Below 500mm|
|Roller:||45# Steel, Quenched Heat Treatment||Shaft:||45# Steel, Quenched Heat Treatment|
Galvanized steel stud roll forming machine,
Cold rolled stud roll forming machine,
Cold rolled stud roll former
Omron Encoder Siemens PLC High-Efficiency Steel Stud And Track Roll Forming Machine
1. Description of stud and track roll forming machine
The Stud And Track Roll Forming Machine is used for the automatic manufacturing of metal c studs and u tracks continuously. Which is mainly for light gauge or lightweight steel building systems.
Now, people tend to use steel. Compare with the traditional clays, stones, or bricks, steel is lightweight, recyclable, cost less money and time. In a lightweight or light gauge steel system, most of the building materials are made of steel, and most of these steel building materials are manufactured by roll forming machines, one of which is drywall stud and track roll forming machine. This machine was designed for the continuous and automatic production of metal c studs and u tracks which are applied for both exterior and partition walls in both individual and industrial buildings.
A drywall stud and track roll forming machine usually consist of a manual decoiler, a feeding guide unit, a punching tool, a roll forming unit, a cutting unit, a transmission unit, a hydraulic unit, a control unit, and run-out tables. Under the PLC control system, this drywall stud and track roll forming machine fully automatically produces 4-6 metal c studs or u tracks out of galvanized steel of 0.6-1.2mm thickness from punching, roll forming, and cutting.
2. Major technical parameters of stud and track roll forming machine
|1||Yield Strength of Material||550 MPa/ 350 MPa|
|2||Material Thickness||0.6-1.2 mm|
|3||Diameter of Main Shaft||60 mm||Can be custom|
|4||Principal Axis Material||Steel 45, Heat Treatment|
|5||Roller Material||Cr12, Heat Treatment|
|6||Roll Station||10 Rows||Can be custom|
|7||Main Motor Power||5.5 KW||Can be custom|
|8||Driving Mode||By Gear Box Or Chain|
|10||Hydraulic Station Power||4Kw With Cooling System||Can be custom|
|11||Hydraulic Oil Pump||CB-E310|
|12||Material of Blade||Cr12, Heat Treatment||Can be custom|
|13||Cutting Way||Pause to Cutting, Non-stop|
|14||Electrical System||PLC and HMI touch Screen|
|15||Voltage||380V/50Hz/3Ph||Can be custom|
3. Major components of stud and track roll forming machine line
|1||Manual Un-coiler||1 Set|
|2||Leveling Device||1 Set|
|3||Punching Device (Optional)||1 Set|
|4||Main Forming System||1 Set|
|5||Hydraulic Cutting Device||1 Set|
|6||PLC&HMI Control System||1 Set|
|7||Run-Out Table||2 Sets|
Q1. What is your advantage?
A1: We have over 10 years of experience in roll forming machines production. Experienced engineers and workers will be helpful for quality control.
Q2. Do you have after-sales support?
A2: Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
Q3. Do you sell only standard machines?
A3: No, most of our machines are built according to customers' specifications, using top brand components.
Q4. Can you be responsible for transport?
A5: Yes, please tell me the destination port or address. We have rich experience in transporting.
Q5. How to visit your company?
A5: 1). Fly to Wuxi airport, we will pick you up.
2). Fly to Shanghai Airport: By high-speed train From Shanghai Hongqiao railway station to Wuxi railway station, then we can pick you up.
Contact Person: Alfred