|
Product Details:
|
| Roller Station: | 12 Rows | Dimensions: | 4500*800*800mm |
|---|---|---|---|
| Power: | 4KW | Productivity: | Approx 25m/min |
| Shaft: | Dia 55mm | Cutter: | Cr12 Material |
| High Light: | metal stud and track roll forming machine,drywall stud roll forming machine |
||
PLC Control Drywall Metal Wall Stud And Track Roll Forming machine CD UD Shape
1. Description of stud and track roll forming machine
Now, people tend to use steel. Compare with the traditional clays, stones or bricks, steel is lightweight, recyclable, costs less money and time. In a lightweight or light gauge steel system, most of building materials are made of steel, and most of these steel building materials are manufactured by roll forming machines, one of which is drywall stud and track roll forming machine. This machine was designed for the continuous and automatic production of metal c studs and u tracks which are applied for both exterior and partition walls in both individual and industrial buildings.
The Stud And Track Roll Forming Machine is used for the automatic manufacturing of metal c studs and u tracks continuously. Which is mainly for light gauge or lightweight steel building systems.
A drywall stud and track roll forming machine usually consists of manual decoiler, a feeding guide unit, a punching tool, a roll forming unit, a cutting unit, a transmission unit, a hydraulic unit, a control unit, and run-out tables. Under PLC control system, this drywall stud and track roll forming machine fully automatically produces 4-6 metal c studs or u tracks out of galvanized steel of 0.6-1.2mm thickness from punching, roll forming and cutting.
2. Major technical parameters of stud and track roll forming machine
| No. | The main parameter of drywall metal stud and track roll forming machine | |
| 1 | Production | CD 60 27;UD 27 23 |
| 2 | Roller station | 12 rows |
| 3 | Dimensions | 4500*800*800mm |
| 4 | Power | 4KW |
| 5 | Thickness of the plate | 0.3-1.0mm or 0.6~1.2mm |
| 6 | Productivity | 25m/min |
| 7 | Middle plate thickness | 20mm |
| 8 | Diameter of shaft | 45mm |
| 9 | Diameter of roller | 100mm |
| 10 | Weight | About 3T |
| 11 | Voltage | 380V 50Hz, 3 phase |
| 12 | Cutter Material | Cr12 |
| 13 | Roller Material | GCr15 |
| 14 | Transmission | Gear-chain |
3. Major components of stud and track roll forming machine
| Components for stud and track roll forming machine | |||
| Name | Quantity | Units | |
| Decoiler | 1 | Set | |
| Main Machine | Feeding device | 1 | Set |
| Roll forming system | 1 | Set | |
| Cut Equipment | 1 | Set | |
| Hydraulic system | 1 | Set | |
| Electric control system | 1 | Set | |
| Supporter/Automatic Stacker | 1 | Set | |
4. Installation service
a. After the machine arrives at the destination, the seller will send the technician to the buyer’s factory to install the machine if the buyer wants. The buyer needs to provide some technicians to assist in the installation work.
b. Installation period is around 5 days. The buyer should have been prepared for the steel sheet, foundation position the machine before seller’s technician's departure.
c. The buyer should arrange the accommodation, food, and traffic in the destination
d. Training period: 2 days. (we can supply training on the operation spot if buyer needs)
5. FAQ
Q: How to maintenance?
A: If using frequently, best coating lubricant on the chain and two ends of the shaft every month,
replace the hydraulic oil every 1-2 years.
Q: Can you make the machine according to my design or photo type?
A: Yes. We have an experienced team for working out the most suitable design and production
Q: How many workers operate this machine to manufacture?
A: Only 1-2 worker.
Q: How is this machine's service life?
A: In the normal maintenance, the service life at least 8 years.
Contact Person: Mr. Alfred
Tel: 0086 18121549786
Fax: 86-510-82620085
