|Thickness:||1.2mm ~ 2.5mm||Forming Station:||16 Stations|
|Shaft:||No.45 Steel, Heat Treatment||Main Power:||15KW|
|Hydraulic Power:||7.5KW||Voltage:||380V/50Hz/3Phase (can Custom)|
t1.2mm C Z Purlin Roll Forming Machine,
t2mm C Z Purlin Roll Forming Machine,
t1.2mm c channel bending machine
47-147mm bottom width C Purlin Roll Forming Machine CZ Purlin Roll Forming Machine
1. Description of c purlin roll forming machine
C-shaped steel is widely used in the purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets, and other building components. In addition, it can also be used for columns, beams, and arms in mechanical light industry manufacturing. For example roof, load-bearing loads, and wall supports such as factory buildings, warehouses, stadiums, and market flower sheds are some of the indispensable steel materials in construction.
The various fittings of galvanized C-shaped steel can be directly connected into different combinations, and their appearance is beautiful when used, which can effectively reduce the weight of the building roof to a certain extent and effectively reduce the amount of steel used in engineering. Therefore, it is called economical and efficient steel, and it is a new type of building material that replaces traditional steel purlins such as angle steel, channel steel, and steel pipe. It can also be assembled into lightweight roof trusses, brackets, and other building components.
C47-147 C Purlin Roll Forming Machine is for producing the bottom width from 47~147mm C purlins.
2. Main Technical Parameters
|1||Suitable Material||Hot-dipped Galvanized Steel Coils|
|2||Thickness of Material||1.2mm-2.5mm|
|3||Roller Stations||16 stations|
|4||Diameter of Shaft||80mm|
|5||Material of Shaft||45# steel|
|6||Material of roller||GCr15 steel with quenching treatment and coated with hard chrome 0.05mm thickness|
|7||Forming speed||Approx. 18m/min|
|10||Weight of the machine||Approx. 10 Tons|
|11||Cutting||Hydraulic Post Cutting|
|12||Material of Cutting Blades||Cr12 steel with heat treatment|
|14||Control system||Panasonic PLC, Inverter, CHNT transformer, and Omron encoder|
Contact Person: Alfred