|
Product Details:
|
| Main Power: | 11KW | Speed: | Approx 18m/min |
|---|---|---|---|
| Roller Station: | 19 Stations | Roller Material: | GCr15 Bearing Steel |
| Roller Shaft: | No.45 Steel. Quenched | Diameter: | 75mm |
| High Light: | c&z purlin forming machine,c channel roll forming machine |
||
C80-300 C Purlin Roll Forming Machine C Z Purlin Roll Forming Machine Full Automatic
1. Description of C purlin roll forming machine
C purlin roll forming machine is an equipment that produces C shaped steel channels continuously out of galvanized or cold rolled steel strips from feeding, punching for holes, bending and cutting.
The main components of a c sectional channel roll forming machine include a manual de-coiler (3TONs capacity), a feeding guide for materials of different sizes, a leveling device, a front hydraulic punching for holes or slots on flanges, roll forming part, a rear hydraulic punching for holes or slots on web, a hydraulic cutting for cut to length, a PLC control cabinet, and and a hydraulic oil pump.
2. Technical Parameters of C purlin roll forming machine
| No. | Item | Description |
| 1 | Raw material width | Below 600mm |
| 2 | Roll forming speed | 15-20m/min |
| 3 | Raw material thickness | 1.0-3.0mm |
| 4 | Type | Galvanized Strip |
| 5 | Main power | 7.5Kw*2 |
| 8 | Pre-Punch | 1 station |
| 9 | Main roller stations | 16 steps |
| 10 | Roller material | Gcr15, quenching and tempering |
| 11 | Main roller material | 45# steel, quenching and tempering, Diameter: 85mm |
| 12 | Length Tolerance | ±1.5mm |
| 13 | Material of cutting | Cr12Mov, quench HRC 58-62℃ |
| 14 | Frequency inverte | Panasonic PLC |
| 15 | Control system | PLC controlling length, encoder is OMRON brand |
| 16 | Transmission typ | 1.5 single row chain drive |
| 17 | Dimension (L*W*H) | 8.5m*1.2m*1.2m |
| 18 | Voltage | 380V,50Hz, 3 phase |
3. Main components of C purlin roll forming machine
| No. | Name | Qty |
| 1 | Decoiler | 1 Set |
| 2 | Guider device | 1 Set |
| 3 | Roll forming unit | 1 Set |
| 4 | Cutting System | 1 Set |
| 5 | Punching device | 1 Set |
| 6 | Output Table | 1 Set |
| 7 | Control System(PLC) | 1 Set |
| 8 | Hydraulic station | 1 Set |
4. C Purlin Sizes
| No. | D(mm) | B(mm) | L(mm) | T(mm) | Coil width (mm) |
| 1 | 100 | 50 | 15 | 1-3 | 210 |
| 2 | 120 | 50 | 20 | 1-3 | 240 |
| 3 | 140 | 50 | 20 | 1-3 | 260 |
| 4 | 140 | 60 | 20 | 1-3 | 280 |
| 5 | 150 | 50 | 20 | 1-3 | 270 |
| 6 | 160 | 60 | 20 | 1-3 | 300 |
| 7 | 180 | 60 | 20 | 1-3 | 320 |
| 8 | 180 | 70 | 20 | 1-3 | 340 |
| 9 | 200 | 65 | 20 | 1-3 | 350 |
| 10 | 200 | 70 | 20 | 1-3 | 360 |
| 11 | 220 | 70 | 20 | 1-3 | 380 |
| 12 | 220 | 80 | 20 | 1-3 | 400 |
| 13 | 240 | 70 | 20 | 1-3 | 400 |
| 14 | 240 | 80 | 20 | 1-3 | 420 |
| 15 | 250 | 80 | 20 | 1-3 | 430 |
| 16 | 300 | 70 | 20 | 1-3 | 460 |
| 17 | 300 | 80 | 20 | 1-3 | 480 |
5. Application:
The c purlin which was produced by C purlin roll forming machine can be used for the major stress structure of the large and middle-sized industrial constructions and civilian constructions. The roof load bearing and wall panel supporting the plants, warehouses, engine houses, hangars, exhibition halls, cinemas, gymnasiums, fair flower stands, etc.
Contact Person: Alfred
