|
Product Details:
|
| Coil Width: | 1000mm | Rolling Speed: | 0-15m/min |
|---|---|---|---|
| Thickness: | 0.3-0.8mm | Suitable Material: | GI, GL, PPGI, PPGL Coil |
| Roller Material: | No.45 Steel. Coated With Hard Chrome | Control System: | PLC (Panasonic) As List In The Note |
| High Light: | double deck roll forming machine,roofing sheet roll forming machine |
||
Building Material Full Automatic Double Layer Roll Forming Machine Roofing Sheet
1. Description of double layer roll forming machine
When you needs to produce two different metal sheets, cladding, trapezoidal, corrugated sheets or metal tiles, a double layer roll forming machine is suitable for you.
Compared to a single layer roof panel roll forming machine, a double layer roll forming machine is designed to produce two different kinds of metal sheets which can be one trapezoidal roofing and one roof/wall cladding sheet; or one trapezoidal roofing sheet and one corrugated roofing sheet; or one trapezoidal sheet and one metal roof tile; or one corrugated sheet and one metal glazed roof tile etc. To sum up, any two of the metal roof panels can be produced by this same double deck roll forming machine.
This Double Layer Trapezoidal Sheet Roll Forming Machine is used for produce YX25-210-840 type trapezoid sheets
2. Major technical parameters of double layer roll forming machine
| 1 | Coil Width | 1000mm |
| 2 | Rolling Speed | 0-15m/min |
| 3 | Rolling Thickness | 0.3-0.8mm |
| 4 | Control System | PLC (Panasonic) as list in the note |
| 5 | Uncoiler | Manual uncoiler |
| 6 | Suitable material | GI, GL, PPGI, PPGL Coil |
| 7 | Roller Stations |
Up layer: 22 stations Down layer: 24 stations |
| 8 | Roller Material | No.45 steel. Coated with hard chrome |
| 9 | Shaft Material and Dia |
Dia 75mm, material: 45# with quenching and tempering |
| 10 | Post cutting | The machine adopts hydraulic cutting system |
| 11 | Material Of Cutting | Cr12, 58-62 HRC hardness |
| 12 | Maim Motor Power | 11kw |
| 13 | Hydraulic Station Power | 7.5kw |
| 14 | Hydraulic Pressure | 12-16Mpa adjustable |
| 15 | Structure Of The Stations | Guide pillar |
| 16 | Tolerance | 3m+-1.5mm |
| 17 | Electric Source |
380V, 50HZ,3 phase According to customer’s require |
| 18 | Way Of Drive | By chain |
3. Major components of double layer roll forming machine
| No. | Item | Quantity |
| 1 | uncoiler | 1 Set |
| 2 | Guiding Equipment | 1 Set |
| 3 | Roll Forming Equipment | 1 Set |
| 4 | Post Cut Equipment | 1 Set |
| 5 | Hydraulic Station | 1 Set |
| 6 | PLC Control | 1 Set |
| 7 | Supporter Table | 2 Sets |
4. After-Sale FAQ
1). Q: How to acquire for service support?
A: Lebron-Machinery is doing its best to provide timely and convenient service support for the customers, the contents of services including before-sale technical counseling, field installation, operate technical training, application solution training, and troubleshooting support, etc. You can gain service support from our distributors in your region.
2). Q: After purchase Lebron-Machinery’s machine, what kind of training could Lebron-Machinery provide?
A: Lebron-Machinery will provide 7 days’ free field training. The training place can be in Lebron-Machinery company or in places designated by the customer where installation takes place, this can all be predetermined by clients in the contract.
3). Q: What kind of warranty do Lebron-Machinery’s gutter machine provide?
A: Except for the consumables, the whole machine has a one-year limited warranty.
4). Q: After buying Lebron-Machinery’s equipment, is there technician in charge of supporting on-site installation?
A: Yes, if the equipment is directly sold from Lebron-Machinery, we will arrange experienced technicians to support for the installation and collaboration when the machine arrives. If the device is sold by Lebron-Machinery’s distributors, LBM will authorize them to send experienced engineers to support for the installation and collaboration when the machine arrives. Except the contract made other agreement for the installation.
Contact Person: Alfred
Tel: +8618115330187
