|
Product Details:
|
| Thickness: | 0.7~1.0 Mm | Main Motor: | 3 KW |
|---|---|---|---|
| Hydraulic Motor: | 2.2 KW | Forming Speed: | 15-18 M/min |
| Roller Station: | 16 Stations | Weight: | Approx 8 Tons |
| High Light: | automatic rolling shutter machine,rolling shutter slats roll forming machine |
||
Full Automatic Aluminum Slat Shutter Door Roll Forming Machine Panasonic PCL Control
1. Description of shutter door roll forming machine
The Steel Shutter Door Slat Roll Forming Machine is for the production of steel roller shutter doors. The raw material can be made out of galvanized steel strips, prepainted steel strips and some occasions alloy aluminum strips. This shutter door roll forming machine is technically capable to produce roller shutter slats with any lengths and effective widths. The normal thickness is 0.6-1.2mm (some customers request heavy duty rolling shutter slats up to 2mm thickness).
A roller shutter always changes its shapes when closing and opening (a roller shutter door is a square or rectangular shape when lowered down to close and it becomes a barrel or drum shape when raised up to open) due to its composition structure; while a traditional door changes only position, not the shape itself.
In order to save more spaces and make the door open and close more conveniently, the idea of using rolling shutter doors has been come out and thanks to the development of roll forming technologies, the real rolling shutter doors have been produced by the designing and building of a steel roller shutter door slate forming machine.
2. Main technical parameters of shutter door roll forming machine
| No | Item | Parameter | Note | |
| 1 |
Suitable
Material |
Type | Steel sheet | |
| Roller Shutter | Thickness: 0.7-1.0 mm | |||
| 2 | Product Specifications | Detail as the attached drawing | ||
| 3 | Power Requirement | Type | 380V/3PH/50HZ | |
| Main motor power(KW) | 3 | |||
| Cutting power(KW) | 2.2 | |||
| 4 | Forming Speed(m/min) | 15-18 | ||
| 6 | Forming Stand | 12 | ||
| 7 | Forming Shaft Diameter(mm) | 65 | ||
| 8 | Type of Cutting | Roll-formed and length-set cutting | ||
| 9 | Control System | Mitsubishi PLC and inverter | ||
| 10 | Run Out Table | 2mX3 | ||
| 11 | Installation Dimension(m) | 8X1.5 | ||
| 12 | Total Weight(T) | 8 | ||
3. Main components of shutter door roll forming machine
| Name | Quantity |
| Uncoiler | 1set |
| Coil sheet guiding device | 1set |
| Main roll forming system | 1set |
| Cutting device | 1set |
| Hydraulic station | 1set |
| PLC control system | 1set |
| Support table | 1set |
4. FAQ
Q: How to maintenance?
A: If using frequently, best coating lubricant on the chain and two ends of the shaft every month,
replace the hydraulic oil every 1-2 years.
Q: Can you be responsible for transport?
A: Yes, please tell me the destination port or address.we have rich experience in transport.
Q: Can you make the machine according to my design or photo type?
A: Yes. We have an experienced team for working out the most suitable design and production
Q: How many workers operate this machine to manufacture?
A: Only 1-2 worker.
Q: Can you supply the raw materials?
A: Yes, we can supply the galvanized steel coil, aluminum steel coil, color steel coil
Q: How is this machine's service life?
A: In the normal maintenance, the service life at least 8 years.
Contact Person: Mr. Alfred
Tel: 0086 18121549786
Fax: 86-510-82620085
