|
Product Details:
|
| Name: | Double Layer Roll Forming Machine | Machine Size: | 10*1.8*1.5m |
|---|---|---|---|
| Machine Weight: | About 8 Tons | Main Power: | 11KW |
| Hydraulic Power: | 7.5KW | Suitable Material: | GI, GL, PPGI, PPGL Coil |
| High Light: | Trapezoidal Double Layer Roll Forming Machine,Trapezoidal Sheet double layer machine,Trapezoidal cold roll forming machine |
||
845 900 Trapezoidal Sheet Double Deck Double Layer Roll Forming Machine Siemens PLC
1. Description
The double-layer roll forming machine is a cold roll forming machine with a two-layer roll set. The upper layer is used for one outline, and the lower layer is used for another outline. When the upper profile is produced, the lower profile will stop working, and vice versa. The roof forming machine is a space-saving and efficient pre-engineering building material machine, which is used all over the world.
Main components of the double layer roll forming machine including Uncoiler, guide system, roll forming system, cutting system, electrical control system, hydraulic system, support frame
The main components of the cold-rolling forming machine are hardly packed in containers, while spare parts are placed in wooden boxes.
2. Technical Parameters
| 1 | Machine Size | 9.5*1.8*1.5m |
| 2 | Roller Stations |
Up layer: 14 stations Down layer: 18 stations |
| 3 | Feeding Width | Belew 1000mm |
| 4 | Material | Galvanized Steel Coil |
| 5 | Thickness |
0.4-0.7mm |
| 6 | Roller | No.45 steel. Coated with 0.05mm hard chrome |
| 7 | Shaft |
45# with quenching and tempering, Dia 75mm |
| 8 | Material Of Cutting | Cr12 Steel, 58-62 HRC hardness |
| 9 | Maim Motor Power | 7.5kw |
| 10 | Voltage | 380V/50Hz/3Ph (can custom) |
| 11 | PLC |
Siemens |
Contact Person: Alfred
Tel: +8618115330187
