|
Product Details:
|
| Suitable Material: | GI Strip And CR Strip | Thickness: | 0.5-0.6mm (235-345Mpa) |
|---|---|---|---|
| Roller Material: | 45# Steel Being Quenched Treatment | Main Power: | 4 Kw |
| Hydraulic Power: | 4 Kw | Forming Speed: | About 20m/min |
| Machine Weight: | About 4000KGS | Machine Size: | About 3.5m ×1.7m × 1.4m |
| Highlight: | metal stud and track roll forming machine,drywall stud roll forming machine |
||
4kw 3.5m length stud and track roll forming machine PLC control system automatic
1. Description of stud and track roll forming machine
The stud and track roll forming machine can roll forms steel stud and track members for use in wall, floor and truss framing. The standard machine produces stud & track members from 3 5/8″ (92.1mm) to 8″ (203.2mm) widths and 26 gauge to 14 gauge steel.
It has the features as follows
High Efficiency
Production speed: 20/min.
9600m per shift one day (8 hours).
Automatic & Easy Operate
High Accuracy
Shaft material is No. 45 steel. Diameter is 55mm. The shafts are tooled by grinding machine 2 times. It’s strong and durable. Ensure product accuracy.
Automatic Operation: once you set quantity and length of the product, the machine will produce product automatically.
Mitsubishi PLC with the touchscreen. Friendly man-machine interaction. The system is simple to learn and easy to operate.
Simple to install and easy to maintain.
You only need to connect some tubes and wires in your factory. Video and manual will show you how to do.
Long service life
Roller material is high-grade No.45 forged steel, plated with hard chrome, processed by digital-controlled procession.
2. Major technical parameters of stud and track roll forming machine
| Suitable material | GI strip and CR strip |
| Thickness of raw material | 0.5-0.6mm (235-345Mpa) |
| Material of rollers | 45# steel being quenched treatment |
| Cutter blade& punching die material | Cr12 mold steel with quenched treatment, HRC58-60 |
| Power Requirement | Main motor power: 4Kw |
| Hydraulic station power: 4Kw | |
| Material of shaft |
High quality 45# steel, with heat treatment. |
| Forming speed | About 20m/min |
| Shaft diameter | dia 55mm |
| Controlling system | Mitsubishi PLC & converter |
| Quantity of rollers | About 15 stations |
| Total weight of machine | About 4000KGS |
| Machine's size | About 3.5m×1.7m× 1.4m |
3. Main components of stud and track roll forming machine
| Name | Quantity |
| Uncoiler | 1set |
| Coil sheet guiding device | 1set |
| Main roll forming system | 1set |
| Punching device | 1set |
| Cutting device | 1set |
| Hydraulic station | 1set |
| PLC control system | 1set |
| Support table | 2sets |
Contact Person: Mr. Alfred
Tel: 0086 18121549786
Fax: 86-510-82620085
