Product Details:
|
Size: | Approx. 5.0m*1.0m*1.2m | Weight: | Approx. 10 Tons |
---|---|---|---|
Roller: | Cr12MoV Steel. Vacuum Quenching. | Roller Station: | 14 Stations |
Shaft: | 40Cr Steel. Heat-treatment, Coat Hard Chrome | Shaft Dia: | Dia. 80mm |
High Light: | 80m/min purlin roll forming machine,CSA purlin roll forming machine,CSA c purlin machine |
Over 80 meters per minute High Speed C Z Purlin Roll Forming Machine Panasonic PLC
1. Description of c purlin roll forming machine
C purlin production process: use the steel strip as the raw material, by the processes such as Leveling, Rolling, Punching, standard length Cutting, etc. become the final product. It can be used for the major stress structure of the large and middle-sized industrial constructions and civilian constructions. The roof load-bearing and wall panel supporting the plants, warehouses, engine houses, hangars, exhibition halls, cinemas, gymnasiums, fair flower stands, etc.
C purlin rolling mill is a kind of equipment for continuous production of C-type channel steel by feeding, punching, bending, cutting, and other processes with galvanized or cold rolled steel strip.
2. Main Technical Parameters
No. | Item | Description |
1 | Machine Size | 5000mm*1000mm*1200mm |
2 | Machine Weight | Approx 10 Tons |
3 | Suitable Material | Galvanized Steel Coil |
4 | Thickness | 0.6-2.0mm |
5 | Feeding Width | About 3/4/6/8 inches |
6 | Effective Width | About 187/212/263/314mm |
7 | Main Power | 18.5Kw |
8 | Hydraulic Power | 4.0Kw |
9 | Roller | Cr12MoV steel. Vacuum Quenching. HRC60~62 degree |
10 | Roller Station | 14 stations |
11 | Shaft Material | 40Cr steel. CNC lathe, heat-treatment, coat hard chrome |
12 | Drive Mode | Chain |
13 | Forming Speed | Over 80m/min |
14 | Voltage | 380V/50Hz/3Ph (can custom) |
3. Main Components
Name | Quantity |
Uncoiler | 1set |
Coil sheet guiding device | 1set |
Main roll forming system | 1set |
Punching device | 1set |
Cutting device | 1set |
Hydraulic station | 1set |
PLC control system | 1set |
Support table | 1set |
4. FAQ:
Q: How to maintenance?
A: If using frequently, best coating lubricant on the chain and two ends of the shaft every month, replace the hydraulic oil every 1-2 years.
Q: Can you be responsible for transport?
A: Yes, please tell me the destination port or address. we have rich experience in transport.
Q: Can you make the machine according to my design or phototype?
A: Yes. We have an experienced team for working out the most suitable design and production
Q: Can you supply the raw materials?
A: Yes, we can supply the galvanized steel coil, aluminum steel coil, color steel coil
Q: How is this machine's service life?
A: In normal maintenance, the service life at least 10 years.
5. Our service
You can send your men to our factory. We will teach them how to operate the machine without training charges
We can send our engineer to your place and offer the training to your men. You just need to bear the cost of our engineer's air ticket, visa, accommodation, food, and transportation in your country.
Apart from the above training course, we also provide 18 months warranty for all the easily broken part of the machine for free and whole-life technical service support
Contact Person: Alfred
Tel: +8618115330187