Product Details:
|
Body Frame: | H450 Type Steel | Side Wall: | Q235 T18mm |
---|---|---|---|
Roller Material: | No.45 Steel. Quenched, Hard Chrome Coated | Shaft Diameter: | 75mm |
Main Power: | 7.5KW | Voltage: | 380V/50Hz/3Ph (can Custom) |
High Light: | Q235 T18mm Gutter Roll Forming Machine,Q235 T18mm round gutter machine,Half Round Gutter Roll Forming Machine |
YX90-150 Type Half Round Gutter Steel Gutter Roll Forming Machine Siemens PLC Omron Encoder
1. Description of steel gutter roll forming machine:
Steel gutter roll forming machine is used for the production of the metal gutters, which are widely used in modern villas and multiple raises buildings. Lebron-Machinery is producing high-quality steel gutter roll forming machines and exports them to India, Vietnam, Indonesia, Thailand, Egypt, etc.
2. Main parameter of steel gutter roll forming machine
No. | Main Technical Parameters | |
1 | Suitable Raw Material | GI, GL, PPGI, PPGL Coil |
2 | Width | 200-600mm |
3 | Thickness | 0.4-0.6mm |
4 | Roller station | 18 stations |
5 | Dimensions | Approx 8.0*1.0*1.2m |
6 | Main Power | 7.5kw |
7 | Forming speed | 12~15m/min |
8 | Diameter of the shaft | 75mm |
9 | Weight | About 6.5 Tons |
10 | Voltage | 380V 50Hz 3phases |
11 | Rolling material | No. 45# with hard chrome and quenched |
12 | Material of the cutting plate | Cr12 Steel |
13 | Control system | PLC control |
2. Main Components
No. | Name | Unit | Qty |
1. | Roll Forming Machine | Set | 1 |
2. | Manual Decoiler | Set | 1 |
3. | Feeding & Leveling | Set | 1 |
4. | PLC Control System | Set | 1 |
5. | Hydraulic Cutting Device | Set | 1 |
6. | Hydraulic Station | Set | 1 |
7. | Receiving Table | Set | 1 |
3. Our Service:
You can send your men to our factory. We will teach them how to operate the machine without training charges
We can send our engineer to your place and offer the training to your men. You just need to bear the cost of our engineer's air ticket, visa, accommodation, food, and transportation in your country.
3. Apart from the above training course, we also provide 18 months warranty for all the easily broken part of the machine for free and whole-life technical service support
4. FAQ
1. Q: Are you a manufacturer, trading company?
A: We are a manufacturer, and we have built up our company since 2007.
2. Q: Where is your factory located?
A: Our factory address is: No. 551, the Zhenze West Road, Huazhuang Street, Binhu District, Wuxi City, Jiangsu, China
3. Q: How can I get to your factory?
A: Our factory is near Shanghai Airport, we can pick you up at the airport. Or you can by plane direct to Wuxi airport. We can pick you up.
4. Q: If I will need to stay in your place for a few days, is that possible to book the hotel for me?
A: It’s always my pleasure, a hotel booking service is available.
Contact Person: Alfred
Tel: +8618115330187