|
Product Details:
|
| Material: | No.45 Steel. Chromed, Quenching | Roller Station:: | 18 Stations |
|---|---|---|---|
| Controller:: | PLC System | Color: | Blue |
| Forming Speed: | 12m/min | Thickness:: | 0.8~2.0mm |
| Warranty:: | 18 Months | Hydraulic Unit Motor Power:: | 5.5kw |
| High Light: | cable tray punching machine,cable tray making machine |
||
Automatic Control Cable Tray Roll Forming Machine Hydraulic Cut 8-12m/Min Speed
1. Product Description
|
5 ton hydraulic De-coiler |
Diameter: 420-560mm hydraulic expansion. Pictures for reference Expansion: Hydraulic de-coiler Capacity: 5000kg per mandrel Max Coil Width: 1250mm |
| Leveling device | 1.7 rolls leveling, 3 rolls up and 4 rolls down 2.Diameter is Ø 80mm, chrome and HRC60 heat treatment to secure the smooth surface 3.Leveling Raw Material thickness:1.5-2.5mm 4.Max Leveling Raw Material width: 1000mm |
| Feeding device | Feeding Servo feeding motor: about 4.4KW,Yaskawa Description: servo feeding can control the punching distance in precision, controlled by PLC, and the feeding tolerance can be+-0.05mm, the servo motor can control the speed, and can accept the input signal, and react quickly, and performance well, the touch screen can display the rotating speed, the length and the quantity, it can be controlled by the manual and auto modes. |
| Punching press machine | 1 Series JH21-160 Brand name: Yangli |
| Main roll forming machine | Suitable Plate Material:Material thickness:1.0-2.5mm Raw material: Galvanized steel and black steel sheets Working Speed: 18-9meters / min Forming Steps: 20 stations Material of Roller: Gcr15, Quench HRC58-62 Plated Chrome Material of Shaft: 45# Advanced Steel (Diameter: *90mm), thermal refining Driven system: chain driven, shafts diameter 90mm Main Power with reducer: 18.5KW WH Chinese Famous Cutting: Hydraulic Cutting Cr12mov Material of Cutting Knife: Cr12Mov, Quench HRC58-62 Hydraulic Station Power: 7.5KW Wuxi Wanshen Famous Chinese Brand The whole machine is controlled by industry computer-PLC. Adjust the height by the motors and the rails, controlled by the PLC |
| Hydraulic cutting system | The cutter blade material: Cr12mov HRC58-62 degree Cutting after forming: Cut the sheet after roll forming to required length Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start. Material of blade: CR12with heat treatment Length measuring: Automatic length measuring Tolerance of length: 6m+/- 1.5mm |
| Control panel | (1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment) (2) Length & quantity measurement automatically; (3) Length & quantity controlled by PLC (4) Length inaccuracy can be amended easily. (5). Control panel: Button-type switch and touch screen (6) The language in the touch screen: English and Chinese (7) Unit of length: millimeter (switched on the control panel) |
2. Main Components of Cable Tray Roll Forming Machine
| No. | Item | Quantity |
| 1 | Uncoiler | 1 Set |
| 2 | Servo Feeder | 1 Set |
| 3 | Hydraulic Punching Device | 1 Set |
| 4 | Cable Tray Roll Former | 1 Set |
| 5 | Hydraulic Cutting | 1 Set |
| 6 | Hydraulic Station | 1 Set |
| 7 | Ran-out Table | 2 Sets |
| 8 | PLC Control System Cabinet | 1 Set |
3. Layout of Cable Tray Roll Forming Machine
5. Our Services
What's the services ?
We provide the technical support for whole life.
Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free.
When need the technician to go abroad, we will arrange the technician.
But the buyer should take all the cost, including Visa, Roundtrip ticket,
suitable accommodation and pay the service fee to the technician with $100/days
6. Our Advantage
7. Picture
Contact Person: Mr. Alfred
Tel: 0086 18121549786
Fax: 86-510-82620085
