Product Details:
|
Material: | No.45 Steel. Chromed, Quenching | Roller Station:: | 18 Stations |
---|---|---|---|
Color: | Blue | Forming Speed: | 12m/min |
Warranty:: | 18 Months | Hydraulic Unit Motor Power:: | 5.5kw |
High Light: | cable tray manufacturing machine,cable tray making machine |
PLC Control Cable Tray Roll Forming Machine Hydraulic Cut Servo Guiding Device
1. Technical parameter
NO. | Item | Unit | Parameter | Brand |
1 | Material type | galvanized sheet,strip steel,etc | ||
2 | Strength of material sheet | Map | more than350 | |
3 | Profile sizes | As the drawing | ||
4 | Production speed | m/min | 40-50 60-90 91-120 | |
5 | Product precision | mm | 0.2-0.5mm per piece | |
6 | Motor | two sets |
motor in dydraulic station motor roll forming machine |
SIEMENS |
7 | Electrical components supplier | German PLC | SIEMENS MITSUBISHI ELECTRIC OMRON SCHNEIDER YASKAWA | |
8 | Hydraulic system supplier |
Adopt advanced wind cool system |
REXROTH HYDAC YUCIYUKEN | |
9 | Other parts supplier | NSK ASSAB HIWIN DAIDO STEEL | ||
10 | Material of roller | Cr12MoV.Dongbei special steel with vacuum heat treatment The harness 58-62HRC | Material CE and heat treatment CE |
2. Description of Cable Tray Industry Forming Machines
The perforated Cable Tray Roll Forming Machine is a duplex and high performance production line for manufacture C section profile with slotted holes for supporting electric wiring in commercial and industrial construction. The cable tray which was produced by Cable Tray Roll Forming Machine usually made from middle gauge steel thickness from 0.8~2.0mm.
The perforated Cable Tray Roll Forming Machine successfully integrated hydraulic punching device or high speed press machine for radiation holes on cable tray. Also, the telescope shaft is available to rapid size changeover without toll change. Pre-cut or post cut can both equipped for cut off finished product.
A whole Cable Tray Roll Forming Machine including the Decoiler, Guide device, Straighten rollers, Main Roll Forming Machine, Hydraulic system, The PLC control system and Ran-out tables. Our roll forming machine equipped with the computer control system. You just need to program in the computer the piece and length you need, then the roll forming machine produces it automatically. The machine is easy to operate, and operate stably.
3. Main Components of Cable Tray Roll Forming Machine
No. | Item | Quantity |
1 | Uncoiler | 1 Set |
2 | Servo Feeder | 1 Set |
3 | Hydraulic Punching Device | 1 Set |
4 | Cable Tray Roll Former | 1 Set |
5 | Hydraulic Cutting | 1 Set |
6 | Hydraulic Station | 1 Set |
7 | Ran-out Table | 2 Sets |
8 | PLC Control System Cabinet | 1 Set |
4. Our Advantage
5. Picture
Contact Person: Mr. Alfred
Tel: 0086 18121549786
Fax: 86-510-82620085