Full Automatic 1+2 Type Surgical Mask Making Machine , Medical Mask Production Line

Full Automatic 1+2 Type Medical Mask Production Line Surgical Fack Making Mask

1 mask body machine + 2 ear band welding machines
(1 person is responsible for loading and unloading)

1.Introduction to equipment

The automatic mask body machine is mainly used for the automatic forming of flat plane masks. After the entire roll of fabric is unrolled, it is driven by rollers. The fabric is automatically unfolded by automatic hemming, hemming, and the nose bridge. In both sides, the sealing is achieved by ultrasonic welding on both sides. After the ultrasonic side sealing, cutting is performed by a cutter, and the whole process is automatically controlled. Only one person is required to operate this machine. The scientific and reasonable mechanical transmission configuration makes this machine extremely efficient. The special welding wheel and cutter wheel design have good abrasion resistance and greatly increase the service life of the product. 

2. Equipment installation and configuration requirements

Equipment size: 3500mm (L) x 1100mm (W) x 2100mm (H);

Equipment weight: 1600 KG

Working voltage: AC220V, 50 / 60HZ, rated power: 4KW

Compressed air: 0.5-0.7Mpa

Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no flammability, corrosive gas, no dust (cleanness no less than 100,000)

3. Equipment characteristics

The machine adopts aluminum alloy structure, small size, stable operation, and low scrap rate;

Equipped with photoelectric detection and automatic counting, which can control the production speed and high output;

It can produce 100 pieces per minute and can produce (3-6 layers) multilayer masks.