|
Product Details:
|
| Weight: | About 6000 Kgs | Size: | About 7m*1.4m*1.8m (Length*Width* Height) |
|---|---|---|---|
| Roller Stations: | 14-16 Stations | Roll Forming Speed: | 10-15m/min |
| Value Added Service: | Offer Free Accessories During The Warranty Period | Electric Voltage: | 380V/3Ph/50Hz Or 220V/3Ph /60Hz (or Custom) |
| High Light: | c&z purlin forming machine,c channel roll forming machine |
||
10-15m/Min Z Purlin Roll Forming Machine Plc Control Hydraulic Cutting Device
1. Technical details of z purlin roll forming machine:
| Suitable Raw Material | |
| Material | Galvanized Steel Coils |
| Thickness | 1.5mm |
| Coil width | According to products size |
| Yield strength | 235Mpa |
| Main Technical Parameters | |
| Quantity of forming rollers stations | 14-16 |
| Diameter of forming rollers shafts | 75mm |
| Roll Forming Speed | 10-15m/min |
| Production Speed | 4-6m/min |
| Forming rollers material | GCR15 mould steel, with quenched treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric power requirement | Main motor power: 15kw |
| Hydraulic unit motor power: 5.5kw | |
| Electric voltage | According to customers requirement |
3. Main componets of z purlin roll forming machine:
|
No. |
Name |
Unit |
Qty |
|
1 |
Decoiler |
set |
1 |
|
2 |
Entry Beach |
set |
1 |
|
3 |
Main Machine for roll forming |
set |
1 |
|
4 |
Cutting System |
set |
1 |
|
5 |
punching |
set |
1 |
|
6 |
Output Table |
set |
1 |
|
7 |
Control System(PLC) |
set |
1 |
|
8 |
hydraulic station |
set |
1 |
4. Z purlin roll forming machine flow charts:
Decoiler-- Roll Forming--PLC System—Hydraulic System –Pressing --Cutting —Output Table
5. Introduction of main components:
1). Decoiler
| Loading capacity | 5T |
| Uncoiling width | 1000mm |
| Inner diameter: | 450-550mm |
Usage:It is used to support the steel coil and uncoil it in a turnable way.
2). Feeding
| Material of axis | 45#steel |
| Number | 3 up,4 down |
| Diameter of axis | 100mm |
| Forming round | Material bearing steel (GR15), quenching 60-62 °C |
Usage:Put the raw material(steel plate) through the beach to manufacture and process,4 down and 3 up , it can guarantee that the products are neat, parallel and everything is uniformity.
3). Puching part:
| Power | 4kw (double valve) |
| Cylinder | 2 |
| Material: | Cr12 quenching |
| Quantity | 2 |
Usage: Punching is added to the flying saw cutting part, by the hydraulic control, mainly in the red c-shaped steel in the hole based, can be set up according to their needs, can be washed from time to punch, simple to use, the durability.
4). Electric Control System
Adopted PLC , transducer, touch panel from Mitsubishi Japan to ensure high speed with stability, precision and lifetime.
Other electric element are Schneider
Equipped with movable switch , air break, radiator, transformer & electric leakage protector for operation convenience and safety.
6. Our Advantages
· Germany COPRA software design
· 5 engineers with more than 20 years experience
· 30 professional technician
· 22 sets advanced CNC production lines on site
· 3 years maintenance and whole life technical support
7. Product Picture:
Contact Person: Alfred
Tel: +8618115330187
