Payment & Shipping Terms:
|Working Speed:||8-12m/min||Shaft Material:||No. 45 Steel. Quenched, Coated Chrome|
|PLC System:||Panasonic, Japan||Roller Stations:||22|
|Roller Material:||GCr15 Steel, Chromed, Tempered And Quenched||Main Power::||22 Kw|
cable tray punching machine,
cable tray making machine
Long Time Service PLC Control Cable Tray Roll Forming Machine Hydraulic Cut
1. Product Description
Cable tray roll forming machine (also called cable ladder roll forming machine ) is capable of making different sizes of cable trays through replacing punching moulds. The cable trays produced by this roll forming machine production line are extensively used in factories and other buildings .Because of their accurate robustness .Cable tray roll forming machine consists of decoiler(uncoiler),leaving machine(flattener),servo feeding device ,punching system ,front cutting device ,guiding device,roll former,rear straightening device and run-out table .
With full and special experience ,we can customize cable tray roll forming machines or cable tray roll forming production lines according to customers"profile drawings and specifications.
|COMPONENT FOR New Condition High Performance Cable Tray Roll Forming Making Machine|
|Main Machine||Feeding device||Set||1|
|Roll forming system||Set||1|
|Electric control system||Set||1|
1.We can make and design all kinds of roll forming machine according to customer's requests.
2.This is a very perfect and durable equipment. We have more than 20 years experiences.
3.This kind of machine has the best quality and the best price. It has accurate measurement and easy operating.
4.We can design and manufacture the special type machine according to the customers' requirement and we could provide technical guiding, production, installation, debugging and maintenance service to all customers.
5. Our product has been exported to many regions and won high reputation because of the high quality and reasonable price.
3. Description of Cable Tray Industry Forming Machines
The perforated Cable Tray Roll Forming Machine is a duplex and high performance production line for manufacture C section profile with slotted holes for supporting electric wiring in commercial and industrial construction. The cable tray which was produced by Cable Tray Roll Forming Machine usually made from middle gauge steel thickness from 0.8~2.0mm.
The perforated Cable Tray Roll Forming Machine successfully integrated hydraulic punching device or high speed press machine for radiation holes on cable tray. Also, the telescope shaft is available to rapid size changeover without toll change. Pre-cut or post cut can both equipped for cut off finished product.
A whole Cable Tray Roll Forming Machine including the Decoiler, Guide device, Straighten rollers, Main Roll Forming Machine, Hydraulic system, The PLC control system and Ran-out tables. Our roll forming machine equipped with the computer control system. You just need to program in the computer the piece and length you need, then the roll forming machine produces it automatically. The machine is easy to operate, and operate stably.
4. Main Technical Details
1. Suitable Plate Material:
1.1 Material– thickness:0.8-1.5mm
1.2 Raw material: Galvanized steel and black steel sheets
2. Working Speed: 12meters / min
3. Forming Steps: 20 stations
4. Material of Roller: Gcr15, Quench HRC58-62 Plated Chrome
5. Material of Shaft: 45# Advanced Steel (Diameter: *90mm), thermal refining
6. Driven system: chain drive, shafts diameter 100mm
7. Main Power with reducer: 22KW WH Chinese Famous
8. Cutting: Hydraulic Cutting Cr12mov
9. Material of Cutting Knife: Cr12Mov, Quench HRC58-62
10. Hydraulic Station Power: 11KW Wuxi Wanshen Famous Chinese Brand
11. The whole machine is controlled by industry computer-PLC.
12 PLC--Panasonic, Japan
13 Touch Screen—Beijing Kunlun Encoder--Omron, Japan
14. Electric parts--Schneider
15. Adjust the height by the motors and the rails, controlled by the PLC
5. Our service
Designing. After order confirmation, we start to design the machine, such as the basement, structure, rollers, shafts, power, cutting device, programs and so on.
|Second step:||The main parts, like rollers and shafts are produced by ourselves. We have several high-precision CNC lathe and other kinds of new machine tools, so that the quality and precision can be controlled.|
|Third step:||Assembling. The machines are assembled by technicians with years of experience, which can help workers improve the production efficiency and machine’s quality.|
|Fourth step:||Test. Raw material of different specifications are prepared for testing. And during test, long enough material is used. Because if the material is not long enough, some defects can not be exposed.|
|Delivery. Because of the weight of machine itself, the packing is usually bare packing. Machine will be fixed inside container by steel wire, in order to make sure it won’t move during transportation and avoid any kinds of damage of machine and container.|
Contact Person: Alfred