|
Product Details:
|
| Machine Size: | 8.0m*1.5m*1.2m (L*W*H) | Roller Station: | 14 Stations |
|---|---|---|---|
| Forming Speed: | 6~8m/min | Roller: | GCr15 Steel. |
| Roller Diameter: | 70mm | Cut Blade: | C12MoV Steel |
| High Light: | t2.5mm Storage Rack Roll Forming Machine,Shaft Dia70mm Storage Rack Roll Forming Machine,Shaft Dia70mm rack rolling machine |
||
1. Description of Storage Rack Roll Forming Machine
This machine is used to produce metal storage pallet rack posts. The finished product storage rack from the coil to the finished product is completed by only one production line. The machine line has a three-in-one with uncoiler A device is used to fix the coil, the leveling machine flattens the coil plate, and then uses the servo feeder to feed the sheet length into the punching machine as a PLC program setting. The hydraulic punching machine has multiple individual cylinders, which can be separated by the PLC Control, so it is easy to perforate any holes or slits or notches on any length side of the paper.
After punching holes in the sheet, the length is cut, and then the sheet is feeding to the roll forming machine.
The roll forming machine will gradually shape the profiles according to the requirements of the drawings. Then the product comes out of the roll forming machine to stand on the table ready for packaging. It is a fully automatic machine production line, very easy to use, only need 1 person to operate it.
2. Technical parameters of Storage Rack Roll Forming Machine
| No. | Item | Description |
| 1 | Suitable Feeding Material | Galvanized Steel Coil, Cold Rolled Coil |
| 2 | Suitable Thickness | 1.5~2.5mm |
| 3 | Roller Station | 14 Stations |
| 4 | Roller Material | GCr15 steel. Quenched. |
| 5 | Shaft Material | No.45 Steel. Quenched. |
| 6 | Shaft Diameter | 70mm |
| 7 | Driven system | Chain |
| 8 | Main Power | 11KW |
| 9 | Hydraulic Power | 7.5KW |
| 10 | Cutter | Cr12MoV Steel |
| 11 | Operation system | Controlled by industry computer-PLC system. |
| 12 | PLC brand | Siemens with Japan English and Chinese Language |
3. Main components of Storage Rack Roll Forming Machine
| Manual Decoiler | Max Width: 1250mm |
| Inner Diameter: 500mm | |
| Outer Diameter: 1200mm | |
| Max Weight Capacity: 5T | |
| Roll Forming | Raw Material: Galvanized Steel Coil |
| Material Thickness: 1.2-2.3mm | |
| Working Speed: 6-8m/min; Adjustable | |
| Rollers: 14 rollers | |
| Material for Rollers: GCr15 | |
| Motor Power: 11 KW | |
| Roller Diameter: 70mm | |
| Transmission Type: Chain Transmission | |
| Appearance Size: About 8000mm*1500mm * 1200mm | |
| Total Weight: About 10T | |
| Hydraulic Cutting | Cutting Type: Hydraulic, automatic cutting |
| Blade Material: Cr12 with polished, quenched HRC 60-62 | |
| Power: 4KW | |
| Control System | Electrical Control: PLC Frequency Control System |
| Voltage: 380V/50Hz/3Ph(or custom) | |
| Length Error: ±1mm | |
| Output Table | It is simple and used to load finished product |
| Length: 4m ( or custom) |
Contact Person: Alfred
Tel: +8618115330187
