|
Product Details:
|
| Weight:: | About 3500 Kgs | Size:: | About 6.00mX0.70mX0.90m (Length*Width*Height) |
|---|---|---|---|
| Roller Stations:: | 12-16 Stations | Main Motor Power:: | 5 Kw |
| Warranty Period:: | 18 Months | Forming Rollers Material:: | No.45 Steel, Coated With Chromed Treatment |
| High Light: | automatic rolling shutter machine,garage door roll forming machine |
||
PI And PG Material Door Shutter Roll Forming Machine PLC Control Long Service
1. Specifications of steel profile roller shutter door slat forming machine
| Decoiler |
a. Coil inner diameter: 450-550mm b. Coil max width: 300mm |
|
perforation machine
|
a.Material of mold: Cr12 quenched b.Power: 3kw c.Punch speed:12m/min d.Thickness: 0.8-1.0mm |
| Roll forming machine |
a. Number of forming steps: 12 stations b. Shaft material: 45# steel with quenched treatment, precision machined, c. Roller material: bearing steel with quenched treatment d. Transmission: by gear e. Forming speed: 10-15m/min |
| Shearing system |
a.The material of blade: Cr12Mov,Hardening HRC 58-62℃ b.Length Tolerance:10m±1.0mm C. Power supply: Hydraulic station |
| Hydraulic station |
a. Hydraulic motor Power:4kw b.Hydraulic oil: 40# c.Hydraulic pressure : 12Mpa |
| PLC station |
PLC control system, Delta . You can set the cutting length in the PLC. |
2. Main components of door shutter roll forming machine
| Decoiler | 1 Set |
| Guiding Equipment | 1 Set |
| Roll Forming Unit | 1 Set |
| Post Cutting Unit | 1 Set |
| Hydraulic Station | 1 Set |
| PLC Control System | 1 Set |
| Reveiving Table | 1 Set |
3. Our Services
We provide the technical support for whole life.
Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free.
When need the technician to go abroad, we will arrange the technician.
But the buyer should take all the cost, including Visa, Roundtrip ticket,
suitable accommodation and pay the service fee to the technician with $100/days
4. Production Flows:
Uncoiling the sheet---Infeed guiding--Roll forming---Rectifying the straightness---Measure length---Cutting the panel--panels to the supporter (option: automatic stacker)
5. Advantages:
· Germany COPRA software design
· 5 engineers with more than 20 years experience
· 30 professional technician
· 22 sets advanced CNC production lines on site
· Passionate Team
· Installation engineers can reach your factory within 6 days
· 3 years maintenance and whole life technical support
6. Application:
This machine is widely used in the production of the door shutters.
Contact Person: Mr. Alfred
Tel: 0086 18121549786
Fax: 86-510-82620085
