Payment & Shipping Terms:
|Machine Size:||15*1.5*0.8M||Main Power:||15 KW|
|Hydraulic Power:||5.5 KW||Forming Speed:||8m/min|
|Forming Station:||26 Stations||Total Weight:||11T|
metal deck roll forming machine,
floor tiles making machine
PLC Control Blue White Floor Deck Roll Forming Machine Automatic Long Time Service
1. Description of floor deck roll forming machine
Steel Roof deck sheets can be used as a composite floor system or as a permanent formwork. It binds with concrete slab and together forms a part of the floor structure. The interlocking between the concrete and the roof floor deck occurs by a system of embossment and ribs that are built into the deck, creating a reinforced concert slab. This fast and simple installation using high strength product gives immediate access to a working platform of permanent form and positive reinforcement. With its advantage, the steel roof deck is widely used various steel constructions
This roll forming machine can roll forming metal floor decking panel profile. After roll formed by this roll forming machine, the surface will be very smooth and beautiful without any scratch on the surface. The designing of the metal deck forming machine is aided and optimized by computer. The metal deck produced by this machine has high strength with big wavelength. It adheres well to concrete. Used on high buildings, it not only saves steel mold plate but also reduced the weight of the story. With the same bearing capacity, it economizes steel and cuts down investment accordingly.
2. Main technical parameters of floor deck roll forming machine
|1||Diameter of principal axis||Dia 95mm|
|3||Main motor power||15kw|
|4||Hydraulic station power||5.5kw|
|5||Electric controlling system||automatic computer control system|
|6||Material of roll||45 # steel hard chrome plating|
|7||Forming station||26 stations|
|10||Hydraulic oil pump||CB-E310|
|12||Length of tolerance||≤1.5mm|
|14||Voltage||380V 50HZ 3Ph|
3. Main components of floor deck roll forming machine
|1||5 tons passive de-coiler||1 set|
|2||Main roll forming machine||1 set|
|3||Control box||1 unit|
|4||Hydraulic station||1 unit|
|5||Out tables||2 units|
1. Q: Are you a manufacturer, trading company?
A: We are a manufacturer, and we have built up our company since 2007.
2. Q: Where is your factory located?
A: Our factory address is: No. 551, the Zhenze West Road, Huazhuang Street, Binhu District, Wuxi City, Jiangsu, China
3. Q: How can I get to your factory?
A: Our factory is near Shanghai Airport, we can pick you up at the airport. Or you can by plane direct to Wuxi airport. We can pick you up.
4. Q: If I will need to stay in your place for a few days, is that possible to book the hotel for me?
A: It’s always my pleasure, hotel booking service is available.
Contact Person: Alfred