Payment & Shipping Terms:
|Suitable Material:||Galvanized Steel Coil||Thickness:||1.5~3.0mm|
|Roller Stations:||23 Stations||Forming Speed:||Approx. 18m/min|
|Main Power:||18.5KW||Hydraulic Power:||7.5KW|
Omron Encode Purlin Roll Forming Machine,
18m/min Purlin Roll Forming Machine,
Omron Encode c purlin machine
Fully Automatic C Z Purlin Roll Forming Machine Siemens PLC Control Omron Encoder
1. Description of CZ purlin roll forming machine
A c/z purlin interchangeable roll forming machine has been designed to produce both C and Z steel purlins with any sizes available.
The profile change including cutting dies for C to Z takes at most 30 minutes (just clutches taken out, a 180° turning on some rolling tools and clutches inserted in) and size change needs at most 5 minutes (just input the required distance through the touch screen on PLC control cabinet ). So much efficiency has been improved by this quick-change c/z steel purlin roll forming machine
2. Technical Parameters of CZ Purlin Roll Forming Machine
|1||Suitable Material||GI, GL, PPGI, PPGL Coil, Q235 Coil|
|3||Roller Station||16 stations|
|4||Forming Speed||8~12m/min (including the punching and cutting)|
|5||Roller Material||GCr15 Bearing Steel. Quenched. Hardness: 58~62 HRC|
|6||Main Motor Power||15 Kw|
|7||Shaft Material||Cr40 steel, Tempering and Quenching|
|10||Blade Material||C12MoV, Quenched|
|11||Hydraulic Station Power||7.5 Kw|
|12||Drive Type||Single row Chain Drive|
|13||Machine Size||10500mmx900mmx1500mm (L*W*H)|
|14||Machine Weight||Approx 8 tons|
|15||Machine Frame||48mm Thick Plate|
|16||PLC Control System||Panasonic|
|20||Other Electrical Components||Schneider|
3. Main Components of CZ Purlin Roll Forming Machine
|2||Coil sheet guiding device||1set|
|3||Main roll forming system||1set|
|7||PLC control system||1set|
Q: How to maintenance?
A: If using frequently, best coating lubricant on the chain and two ends of the shaft every month, replace the hydraulic oil every 1-2 years.
Q: Can you be responsible for transport?
A: Yes, please tell me the destination port or address. we have rich experience in transport.
Q: Can you make the machine according to my design or phototype?
A: Yes. We have an experienced team for working out the most suitable design and production
Q: Can you supply the raw materials?
A: Yes, we can supply the galvanized steel coil, aluminum steel coil, color steel coil
Q: How is this machine's service life?
A: In normal maintenance, the service life is at least 10 years.
Contact Person: Alfred